How to Care for Door Locksets07/31/2015 Back To Blog
Even if the door lock cylinder is kept in perfect condition, this does not mean that the locking device will operate normally. This is because there are many other important components, from the handle to the blade. Given this, it is important for you to provide maintenance to the entire lockset. Learn how to do this job.
Evaluation and Improvements
Open the door and inspect the strike plate - Look into the holes where the latch and blade go and check for obstruction. Inspect the metal surface closely for scratches, denting and other types of damage. If there is damage around the holes, this is a sign of misalignment of the door lockset and the strike plate. This issue can be due to improper installation or loose hinges. In any case, timely repair is required.
Check the screws of the lockset and the strike plate - Tighten them if they are loose. If they are damaged, you must replace them with new ones right away for keeping the locking device as secure as it is supposed to be. Use new screw of the same type and length as the existing ones. Both factors are extremely important.
Test the operation of the lockset - Slip the key gently into the keyway and turn it into the desired direction. If you hear strange scraping sounds or there is great resistance, key or lock repair may be required. It must be made immediately if the problem is not resolved with cleaning and lubrication.
Cleaning and Lubrication
Prepare a cleaning solution of cool water and a few drops of liquid detergent in a bowl - Dip soft microfiber cloth in it just a little bit. Rub all surfaces gently with the cloth. Do not miss to clean the strike plate as well as all sides of the lockset.
Use a damp cloth for rinsing the hardware - Perform this task right after completing the cleaning. No detergent residue must remain on the surfaces. The specialists of our locksmith company in Uxbridge warn against the use of running water for cleaning any home door lock hardware.
Apply graphite powder lubricant into the keyway and onto the key - If you have a double cylinder locking device, you must lubricate both sections. Let the lubricant come out of the keyhole and spread it around the visible section of the cylinder for best results. Place the lubricated key into the lock and turn it several times.
Provide full maintenance once every year after new lock installation.